Switch 4860-1 (single switch)
Switch 4860-2 (dual switches)

Colors: Available in all White, Silver & Black, or Gold & White

Voltage/Power/Current Ratings:
12 volts - 100 watts - 8.3 amps
24 volts - 200 watts - 8.3 amps
120 Volt AC - 1000 watts - 8.3 amps
230 Volt AC - 2000 watts - 8.3 amps

Dimensions (same for 4860-1 and 4860-2)

Mounting Suggestions:

1. New installations: first make a cutout for the  2.125" diameter housing directly into your wall panel. Seat the housing into the wall cutout and mark the wall for 4 pilot holes to match the housing corner screw hole pattern. Remove the housing. Drill the pilot holes in the wall. Wire the switch assembly to your wiring in the wall. Seat the switch housing into the wall cutout. Install 4 mounting screws to hold the housing to the wall. Seat the switch assembly in the housing and snap the bezel into place (this hides the mounting screws and holds the switch assembly).

2. To retrofit into an existing switch housing, you may want to mount the switch onto a blank wall plate that fits onto your existing switch housing (similar procedure to the preceding paragraph). Standard Blank Wall plates are available in various colors from hardware stores and electrical suppliers. Standard wall plates fit standard residential style electrical switch boxes.